How To Install A USB Outlet

USB outlets help to power USB devices without chargers. You can plug multiple USB devices at once using a USB outlet.

The other great thing about USB outlets is they can be installed easily using some practical ways. If you are a DIY fan, here is good news for you. You can install a USB outlet by reading this guide. This guide will include step-by-step methods to install USB outlets.

Before moving ahead in this guide, make sure that you are not violating government electrical regulations by performing electrical work in your home or area. If you have the authority to perform electrical works, remember to use all the required safety tools and rules while installing USB outlets. If you are ready to learn the installation steps, keep reading this guide.

Choose the right USB outlet based on your needs

A few years back, it was not easy to find outlets with USB ports, but now you have many options. We recommend Legrand and Leviton as top models. You will also get several affordable options available in the market. You can find outlets based on your needs.

To install a USB outlet, you will have to make a hole in the wall around 3 inches for proper installation because it comes with extra electronics. You can also consider a wall plate to border the sockets.

Use a voltage tester

A voltage tester is an excellent tool that helps to test electric current in a circuit. Like other tools, it is good to use it for electrical safety. However, you must have to turn off the power from the primary source before installing the USB outlet, but a voltage tester helps you confirm the electric current in a particular circuit. Most important, don’t forget to test the tester before using it.

Shut down the electricity

After deciding to replace the existing outlet, remember to shut down electricity from the main source. Ensure that you have turned off the power of the room or the area, you have to install the outlet.

Take away the existing wall plate and outlet

Before removing the wall plate and outlet, make sure that electricity is completely turned off. After that, remove the plate and outlet by unscrewing.

Remember the existing wiring

When you open the plate and outlet, try to understand the existing wiring. If you don’t want to remember the wiring, capture an image of that on your phone. This act will help in the rewiring process while fitting the new outlet.

Take out the wires from the old outlet

Once you know the existing wiring, loose the screws that contain wires and remove them from the port.

Connect the USB socket

Now you can connect the USB outlet by ensuring the right electrical wires and terminals. After connecting successfully, make sure that you have secured the outlet and wall plate.

Now turn on the power and test your USB outlet

After doing all the above steps carefully, turn on the power to test the outlet. Here the voltage tester will work well. So, take the voltage tester and ensure that all the outlets are working correctly.

Now you know how to install a USB outlet and eliminate the hassle of charging.

Source url:- https://ensetup.com/how-to-install-a-usb-outlet/

Netflix’s Mockumentary Show ‘Death to 2020’ Got Negative Reviews

Charlie Brooke’s Death to 2020 was supposed to be a mockumentary series in 2020, but it turned out as a horror.

Death to 2020 is a mockumentary 70 minutes show that features a series of fictional characters discussing the events of the United Kingdom and the United States, including the presidential election and the COVID-19 pandemic. The show was released on 27 December 2020 on Netflix. It created much hype near its streaming dates but received a mostly negative critical response.

Netflix’s Mockumentary Show ‘Death to 2020’ Got Negative Reviews

In the show, a few characters discussed the event of 2020 with a mixture of true satire and information. However, the most highlighted topic of the series is a coronavirus. The film covers Australia’s bushfire in 2019-20, the environmental speeches of Greeta Thunberg’s at the World Economic Forum, the 2020 presidential election of the United States, the 2020 Oscars, and the stepping down of Prince Harry and his wife Meghan from British royal family. The show covers the killing of George Floyd and the subsequent protests of the U.S., protestors removing the statue of Edward Colston in Bristol, U.K., and many more such events that the world has faced in 2020. At the end of the show, the characters jokingly predict the event of 2021.

Samuel L. Jackson played the role of a reporter for the New Yorkerly Times named Dash Bracket. Hugh Grant featured as a historian, Tennyson Foss. Lisa Kudrow appeared as Jeanetta Grace Susan, a non-official conservative spokesperson. As Dr. Maggie Gravel, Leslie Jones played the character of a behavioral psychologist. The director reprises his original job profile as director James in the show.

Critics called Netflix’s mockumentary as “disappointing” and compared the content with Brooker’s previous projects like Black Mirror and Screenwipe. The series got an average rating of 39 out of 100 on Metacritic based on four reviews. The critic of Telegraph, Chris Bennion, gave two stars out of five and remarked it as “huge disappointment, as the humor is as predictable as the targets of the jokes.” Ed Cumming of The Independent gave only one star to the show, saying that “waiting for the punchline that never arrives and Grant is not given a single decent line.” The critic of The Hollywood Reporter, Daniel Fienberg, summarised the show as the “generally hacky piece of recycled political satire and tired documentary parody.” Fienberg said that he found it “astonishing how lazy everything is.” He said that he watched it as worse than many American topical comedies. However, Fienberg appreciated that the show had discussed the George Floyd protest content with “outrage and anger.”

Source url:- https://en1mcafee.com/netflixs-mockumentary-show-death-to-2020-got-negative-reviews/

How to Unlock Chromebook Using Android Phone’s Smart Lock8

The feature of pairing an Android phone with a Chromebook is quite helpful for the users. It allows the user to access both of their devices easily and quickly while being connected. Once both devices are connected, the syncing of SMS and other essential things like Instant Tethering also becomes easier. Connecting an Android phone with Chromebook is pretty easy, and users can use this feature to keep their Chromebook protected. Android’s Smart Lock feature allows the user to keep both their devices protected. So if anyone doesn’t know how to use it, here’s the guide for it.

How to Pair Android Phone with Chromebook

First, tap on the Time and Battery icon on the lower right side of the Chromebook’s display.
Tap on the settings icon.
Press Set up under the Connected devices section.
In the following section, users can choose to link their Android phone with Chromebook.
The desired mobile device is not appearing for pairing, then press on the Dropdown menu.
Tap on the Desired phone.
Tap Accept & continue.
Now type the password of the Google account.
Tap Done.
Once the verification is completed, a completion screen will appear.
Tap on Done to finish the setup.

Once the Android phone and Chromebook are connected, users can use their phone to unlock the Chromebook, and here’s how to do it.

How to Unlock Chromebook with Smart Lock

First, unlock your paired Android phone.
If using Smart Lock already, make sure it isn’t under timed out condition.
Open your Chromebook.
Look at the Lock icon on Login Screen. If the lock is green, it means the connected Android device is unlocked.
Now click on Profile Picture on Chromebook to unlock it.

However, if the lock is in yellow, users will have to check the Android phone and Chromebook connection or check if the phone is locked. In both of these conditions, the lock icon will remain yellow, and it must be green to unlock the Chromebook through an Android phone.

Chromebook is such an exciting device that has some exciting features. Users can take advantage of Chromebook in several ways. Its ecosystem is highly reliable and helpful for users who use Android phones and laptops together. Users can share backup data, photos, settings, passwords instantly.

Conclusion

Unlocking Chromebook using an Android phone is a pretty exciting and helpful feature. By using this feature, users won’t require to enter the password on their Chromebook device. They can directly tap on the profile picture to unlock the device and use it as always. Several brands have now launched their Chromebook models. So now users have plenty of options to choose their preferred configuration model of a reliable brand.

Ava Williams is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, She has written technical blogs, manuals, white papers, and reviews for many websites webroot.com/safe

Arnold Schwarzenegger’s Daughter Cried For the Terminator 2 Makeup

The famous character of Arnold Schwarzenegger traumatized his young daughter on Terminator 2: Judgement Day’s set.

Terminator is a media franchise created by Gale Anne Hurd and James Cameron. The franchise is a series of science-fiction action movies, novels, and comics. Terminator 2: Judgement Day is the sequel to the 1984 movie The Terminator. It stars Arnold Schwarzenegger, Linda Hamilton, Edward Furlong, and Robert Patrick. The plot follows Sarah Connor (Linda Hamilton) and her ten-year son John (Edward Furlong). An advanced Terminator pursues them: the liquid metal (Robert Patrick) sends him back in time to kill John Connor and prevent him from being the leader of human resistance.

Arnold Schwarzenegger The Terminator https://www.instagram.com/p/B4VFvztALNG/?igshid=1ugimydq6pi4 Katherine Schwarzenegger/Instagram

Actor Schwarzenegger appeared as villainous Terminator Model 101, also known as a T-800. He is a synthetic organism composed of living tissue over a titanium endoskeleton. He is reprogrammed and sent back in time to save Connor. Matt McColm served as his body double for the stunt sequences.

Cameron’s Terminator is a critically acclaimed film. The movie got an approval rating of 93% on Rotten Tomatoes based on the 82 reviews with an average rating of 8.52/10. It scored 75 on Metacritic. The film collected a gross of $520.9 million against a budget of $102 million.

The screenplay of the movie contains many amazing action sequences, emotions, and incredible special effects. The audience loved the special effects job and makeup, but Schwarzenegger’s daughter felt differently and was horrified to watch her father in that look.

During a conversation with Yahoo’s Kindergarten Cop reunion, Schwarzenegger and his co-cast discussed their kids’ reaction to being on set. The actor shared that his family, including his children and his wife Maria Shriver, loved to watch his action sequences- except his daughter Katherine. Her daughter cried while watching his first few films.

Schwarzenegger said, “Maria would come out to the set when we were in the middle of shooting Terminator 2. And so she saw me when half of the face was gone, and the eye was lighting up and all that. All this kind of weird makeup, so she started screaming and crying on the set because she didn’t understand why daddy looked like that.”

However, Katherine Schwarzenegger was around one year old when she went to her dad’s film set. Hence it makes sense that the little child got scared and burst into tears.

Source url:- https://6morton.com/arnold-schwarzeneggers-daughter-cried-for-the-terminator-2-makeup/

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

How to Choose the Right Cloud Storage and Backup Provider

Having cloud storage is a great way to store data online. It is a safer option than storing data locally, and there are many more advantages of cloud storage. Cloud storage is beneficial for both personal and professional needs. It allows users to access stored files and documents anytime from anywhere.

But here, the problem is how one can choose the right platform for storing or backing up data online from so many options. That is why we are here to help you find the perfect cloud storage and backup provider. This comprehensive post will remove your confusion about cloud storage and guide you in choosing the right service provider. Just keep reading this post.

How to Choose the Right Cloud Storage and Backup Provider

Early preparation for a cloud and backup service provider

Before going for a cloud service provider, you need to analyze your needs. You can ask yourself some questions. Why do you want cloud storage? What type of features do you need in cloud storage? When do you want to access the stored files? All these questions will give a clear vision of your needs and help you choose the right cloud platform. Let’s understand it with an example. If you are a small business owner and dealing with some sensitive data, you will have to choose a highly secured cloud service.

Do you understand the difference between cloud storage and cloud backup? You can understand it easily. Cloud storage works as a primary location for storing data. A cloud backup allows you to create a replica of already stored data so you can find them in the event of hacking attacks, software crashes, and any other system or digital threats. Moreover, follow the below steps for proper guidance.

Choose a service with adequate storage

Storage space plays a vital role in a cloud service. If you want to store only your personal files and documents, you can consider a service with low volume like iDrive. It provides 5GB of storage for free. If you want more free storage, you can go with Google Drive for 15GB. If you’re going to buy a cloud service for your business or professional needs, you should consider a premium service with massive storage space.

Decide how do you want to share the cloud service

If you run a team of professionals and have to provide access to all, then, in that case, you need to pay extra attention while choosing a cloud service. Many companies charge on a per-user basis for a specific amount of data. It can be advantageous, especially when you add more employees. Overall, you should choose a service that allows unlimited access but charge based on the total storage volume.

Take security as a priority

Your information is prone to hack or leak anytime and anywhere. So it is crucial to take security as a priority and choose a fully secured platform. Please consider a service provider with end-to-end encryption. Select a service that you only can access or the cloud storage provider can access, only on your permissions. Go for a service with SSL (Secure Sockets Layer) OR TLS (Transport Security Layer).

Verify uptime record

Don’t forget to verify the uptime record of the cloud server you want to buy. Uptime history lets you know about the server availability for a specific time. Look for an uptime record of around 99%.

Confirm how and where you will store data

It is also an essential factor to consider in cloud storage. Avoid buying a service that stores your data on distant locations as you can face slow performance. Go for server locations where you get convenient uploading and access to data.

Think about software compatibility

For uninterrupted cloud service performance, perfect compatibility of your system’s software with the cloud storage is required. So consider this aspect as well. These are some tips to take into consideration before going for a cloud service.

Fossil to Add LTE in Its Next-Gen Smartwatch

Fossil has delivered some of the finest smartwatches that ensure hassle-free performance. Fossil seems like it’s in a quest to enhance this performance by integrating LTE as cellular connectivity. Almost a year has passed, when Fossil launched its fifth generation smartwatch. And, with its sixth generation, Fossil will launch an upgraded version that will have LTE. Though it is an initial phase to estimate and forecast the features of this new smartwatch, the FCC website has provided sufficient information on the same.

Latest Development

The news broke out with the FCC filing, where a model named C1NF1 under the flagship of Fossil has emerged. According to this Fossil’s filing to FCC, the new Fossil smartwatch (under the C1NF1 model) supports LTE 2,4, 12, and 13 bands. This smartwatch will also carry connectivity features, including Bluetooth, NFC, and Wi-Fi. In the current scenario, there is no information on battery capacity. But, as per the details available, the new smartwatch is tested with an APP00310 battery. This battery has a configuration of 2.85Vdc and a 0.4Ah power rating.

What does it mean by adding LTE?

The addition of LTE decreases the user’s reliance on the smartphone. As a result, it enhances the user’s mobility and lets the user move with a smartwatch. Because LTE supports packet switching, it allows the exchange of voice and data. Hence, the user will be able to take calls and respond to text messages. LTE ensures faster data transmissions of large volumes of data. Therefore, a user can listen to music. LTE optimizes network usage and battery consumption. These optimizations will be beneficial for the new Fossil smartwatch.

Expectations

One of the biggest expectations lying with Fossil’s next-gen device is that it will upgrade its processor. Till Gen-5, Fossil has integrated Qualcomm’s Snapdragon Wear 3100. But now Qualcomm has an upgraded variant – Snapdragon Wear 4100. Hence, many users will speculate that this new processor from Qualcomm will become the core equipment in the next Fossil smartwatch. The new Qualcomm smartwatch processor has a 25% better battery life and faster LPDDR3 memory than its last predecessor and is based-on 12 nm technology. Also, the processor shows 85% better performance. The spill-over effect will come to the new smartwatch too. Apart from this, one can expect all the equipment present in the last version of the Fossil smartwatch can be there in the new one. The sensor instruments that will be present in the next-gen Fossil watch are:

Accelerometer
Altimeter
Ambient light sensor
Gyroscope
GPS

Conclusion

Integrating LTE technology will deliver a better smartwatch that reduces smartphone-reliability and enhances cellular connectivity. Embedding the latest Qualcomm processor for wearable electronics devices will have a positive impact. It will enhance the battery performance and faster operation of the smartwatch. Apart from this, speculations of holding the same kind of sensors will be intact in this new smartwatch. However, one cannot predict the release of Fossil’s next-gen smartwatch as of now. It is because it has crossed the development stage and is waiting for the filing clearance from FCC. Hence, many undiscovered tenets of the smartwatch are still undercover and will open once the smartphone is available in the market. Therefore, wait for the official launch and unveil the remaining hidden treasure of the new Fossil smartwatch.

Source url:- https://activatelivesafe.a6activate.co.uk/fossil-to-add-lte-in-its-next-gen-smartwatch/

Patty Jenkins Wants Batman and Superman to Join Wonder Woman in the Third Film

Patty Jenkins returned as a director with her 2017 film Wonder Woman, and we have to agree that she did make a spectacular comeback. Despite the fact that she has already made a second part of the movie, which is about to be released on HBO Max and in theaters, she is in no mood to take a rest.

Jenkins has already confirmed that she will soon start working on the third Wonder Woman film soon. Not only that, she has even mentioned the fact that she already has clear cut ideas of what the third film might entail. Gal Gadot enjoys playing Wonder Woman, so she will definitely be returning for the third film; however, what is interesting is the fact that Jenkins is looking to include some power-packed cameos as well.

Courtesy of the report shared by We Got This Covered, we have come to know that Patty Jenkins has big ambitions of including Batman and Superman in the third installment. Yes, indeed. Now, Patty Jenkins wants to make the universe of Wonder Woman much more interesting. She is in all mood to establish a crossover between three high profile characters from DC. DC fans would love to see that, and they are already speculating about the movie. Daniel Richtman has agreed with the speculations and has thrown in his opinions as well.

However, there are many things that need to be done before we can talk about having Batman and Superman in the film, and as of now, there is no confirmation on why she wants those characters. What is confirmed right now is that the third Wonder Woman film will be the final time Patty Jenkins wears the director’s hat for Wonder Woman. And, as per the above-mentioned report, she is demanding Henry Cavill and Ben Affleck to reprise their DCEU characters.

Now, if that happens, you can imagine that DCEU has been fixed and is up and running. And before leaving, Jenkins would give the studio and the fans something they had all wished for, of course, apart from giving a highest-grossing female-directed film in 2017.

Gal Gadot will also be seen in the re-adaptation of the 2017 film Justice League by Zack Snyder. As you might have already heard, Snyder had to leave the film midway due to the tragic death of his daughter. Now, he has returned to finish what he had started. He will reshoot some of the scenes and re-edit the entire story. “Zack Snyder’s Justice League” will arrive on HBO Max on September the 5th, 2021.

DC Studios is looking to rebuild itself after the debacle of the 2017 film, which even forced some actors to reconsider their affiliation with the studio. The release of films like the 2018 blockbuster Aquaman and the 2019 film Shazam have put the momentum in the studio’s favor. Now, Wonder Woman will add further to that.

Source url:- https://help3mcafee.uk.com/patty-jenkins-wants-batman-and-superman-to-join-wonder-woman-in-the-third-film/

Patty Jenkins Wants Batman and Superman to Join Wonder Woman in the Third Film

Source url:- https://help3mcafee.uk.com/patty-jenkins-wants-batman-and-superman-to-join-wonder-woman-in-the-third-film/

Wonder Woman 1984 Obtains Almost $40 Million on its Offshore Opening Weekend

And things have just started for the Patty Jenkins’ film as it awaits its historic release in the United States on Christmas Day.

DCEU’s latest superhero venture, “Wonder Woman 1984,” directed by Patty Jenkins, starring Gal Gadot, is close to earning $40 million in its opening weekend in the overseas market. Mathematically, as per the report shared by Warner Bros., it has been estimated that the film has earned approximately $38.5 million from the tickets sold in theaters in the overseas markets. The Chris Pine and Gal Gadot starrer “Wonder Woman 1984” revealed itself in the abroad market in the preceding week.

Wonder Woman 1984 Obtains Almost $40 Million on its Offshore Opening Weekend

The film was released in 32 countries, including China. In total, Wonder Woman was screened all throughout the weekend on 30,000 screens. The studio added that since the movie has been met with a largely positive review, the signs are there for a largely optimistic future.

As per the report shared by Warner Bros., the film has fared well in China, attaining a majority of the earnings (approximately $18.8 million). However, the film was not the best film in the country over the weekend-that feat was achieved by another local film.

Fans living in the United States have to wait some time more as the theaters and HBO Max are gearing up for its historic release on Christmas Day, i.e., Friday (December the 25th). To the utter dismay of some veteran filmmakers, Warner Bros. took a bold decision to release all of its upcoming films in the theaters and on HBO Max to counter the restriction imposed by the pandemic.

Nevertheless, we should be glad that finally, we can see what Patty Jenkins has made. The film has long been made, and though it was due for a release in the last year itself, it had to be pushed back because Star Wars: The Rise of Skywalker was already due for a release during that time. Then, it was set for a release date similar to the 2017 Wonder Woman film, but, as we know, the pandemic had gripped the world during that time. Ultimately, it has made its way to the Christmas Day of 2020, pushing Dune to 2021.

The 2017 film remained the biggest DCEU film up until the release of the Aquaman in 2018. The film had earned $800 million in 2017. However, it had been anticipated that the sequel would have surpassed that total under normal circumstances. Now, with pandemic restricting people’s activities, nobody is sure exactly how much “Wonder Woman 1984” would earn.

Warner Bros. has tried to be creative in unprecedented times. They stuck with their traditional theatrical release plan with “Tenet” but decided to send “The Witches” straight to their streaming service, which is HBO Max.

Now, they have decided to embrace a dual release plan for Wonder Woman 1984 and all the upcoming films which includes “Dune” as well.

Source url:- https://6morton.com/wonder-woman-1984-obtains-almost-40-million-on-its-offshore-opening-weekend/

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

Xfinity Gen 2 xFi Pod – Review

Xfinity Gen2 xFi Pod is the latest Wi-Fi extender by the company; it’s relatively five times faster than the first-generation xFi Pod. However, there are plenty of things to know about the Xfinity Gen 2 xFi Pod, so let’s take a brief overview of the device. Here we go.

Design

Like the Gen 1 xFi Pod, Xfinity Gen 2 xFi Pod is six-sided (hexagonal), but it’s slightly bigger. You can easily plug it into an AC outlet. It boasts air vents on the sides and rear to dissipate heat. It offers you an upgraded tri-band AC3000 radio along with a third radio for service optimization and back-channels communications. The device even comes with a pair of ethernet ports for two hard devices.

Set-Up

The installation process of Xfinity Gen 2 xFi Pod is a no brainer. You just need to install the Xfinity xFi app on your smartphone or tablet, and you are ready to monitor and control all the Gateway-connected devices, including computers, game systems, as well as lights. Plug the pod into an AC outlet, and the app will automatically recognize and awake the device; you just need to hold your smartphone six inches away from the pod. Keep in mind that the Xfinity Gen 2 xFi Pod is specifically designed for Xfinity internet and equipment customers, which means you won’t be able to use this pod with any other extenders. So the gateway must always be in the non-bridge (default) mode.

Speed

The company clearly says that the Xfinity Gen 2 xFi Pod is designed to help extend the range of your Wi-Fi coverage and not to increase the speed of your Wi-Fi, so please keep this thing in your mind. However, it works fantastically, and with the help of this extender, you can use your Wi-Fi even in the areas of your home where you get poor or no Wi-Fi signals. Overall, you will be happy to use this extender, especially if you are an Xfinity customer.

But if you are using any other router for Xfinity service to save monthly charges, you won’t be able to use the Gen 2 xFi Pod. You should not control the bandwidth access because some old devices don’t support 5GHz bandwidth; they only use the 2.4GHz band. So it’s not possible to tell a device with 2.4GHz support to use 5GHz bandwidth. So you should avoid controlling bandwidth access manually.

Conclusion

Well, the Xfinity Gen 2 xFi Pod is undoubtedly an excellent Wi-Fi extender. It’s very simple to use, you just need to plug the pod and install the Xfinity app, and you are good to go.

If you are already paying for an Xfinity Gateway, I recommend you to buy this pod to control your devices. However, if you are not an Xfinity customer or want to control bandwidth for devices manually, you shall go for any other Wi-Fi extender.

By the way, the Xfinity Gen 2 xFi Pod is available for $119 for a one-pack. The two-pack pods will cost you $199. That’s all I had to share about this Wi-Fi extender. I hope you liked the article. Thank you for reading it. Have a great day!